How can I tell which KOHLER toilet seat I have?
KOHLER plastic toilet seats have a KOHLER logo molded into the bottom of the toilet seat ring. As of October 2019, most KOHLER plastic toilet seats have the model number and color code printed on the underside of the toilet seat hinge. The seat must be removed from the toilet to view the model number.
Are all KOHLER toilet seats the same?
There’s no wrong answer. It’s simply a matter of choosing the color that helps create the mood you’re after. KOHLER seats come in ten rich colors which are a perfect match for KOHLER toilets.
Can you just replace a toilet seat?
Installing or replacing a toilet seat is a fairly straightforward job. Whether you’re replacing your loo seat because it’s old, damaged or you want a new style; all you’ll need are some basic tools.
How do I know what toilet seat I have?
Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.
How do I know what toilet seat to buy?
Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet. The standard measurement for this distance is 5 ½”, with a midpoint of approximately 2 ¾”. Place the hook of your tape measure at the midpoint and measure to the outside edge of the toilet bowl rim in front.
Will an American Standard toilet seat fit a Kohler toilet?
When you don’t notice it, a good toilet seat is the best. The seat will fit most of the toilet brands such as Kohler, American Standard and Crane.
How often should you replace your toilet seat?
Q. Why should I replace my toilet seat? While a toilet typically lasts at least 15 years, toilet seats last only about 5 to 7 years before they begin to crack or become stained to the point that, no matter how hard you scrub, they no longer appear clean. That’s when it’s time to consider replacement.
How do you repair a Kohler toilet?
How Repair a Kohler Kelston Toilet That Runs. Open the lid of the tank and check the water level. If it’s above the opening of the overflow tube, and water is draining into the tube, you need to adjust the float. To do this, turn off the water supply and flush the toilet to empty the tank and let the float fall.
How do I replace a Kohler toilet gasket?
To replace the flush valve seal on a Kohler toilet, start by using turning the water shut-off valve to the right to cut the supply to the toilet. Remove the lid from the top of the toilet tank, and drain the tank fully by holding the down the handle of the toilet until the tank is completely empty.
How do I replace my toilet seat?
Align the bolt holes of the new seat with the holes of the toilet base. Push the anchor bolts through the holes, and then screw on the nuts from the underside of the bolts until they’re hand-tight. Center the seat and then tighten the nuts. Once the seat is centered, use the adjustable wrench to tighten the nuts.
What is an oval toilet seat?
A toilet seat is a hinged unit consisting of a round or oval open seat, and usually a lid, which is bolted onto the bowl of a toilet used in a sitting position (as opposed to a squat toilet).