Why is my SSD not being detected?

Posted on By Aman Kelley

Why is my SSD not being detected?

The BIOS will not detect a SSD if the data cable is damaged or the connection is incorrect. Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

Why is my Kingston SSD not showing up?

Sometimes, your SSD not showing up is because the drive letter of the SSD is missing or conflicting with another disk, and the Windows OS is unable to recognize it. You can solve this problem by manually assigning the SSD a new drive letter in Windows Disk Management.

How do I get SSD to recognize?

You can open the BIOS for your computer and see if it shows your SSD drive.

  1. Turn off your computer.
  2. Turn your computer back on while pressing the F8 key on your keyboard.
  3. If your computer recognizes your SSD, you’ll see your SSD drive listed on your screen.

How do I initialize a Kingston SSD?

Installation Process

  1. Click on the Kingston SSD Manager (KSM) link to initialize the software download.
  2. Locate your download and extract the contents.
  3. Run the KSM Setup executable as administrator.
  4. Follow the prompts within the Setup Wizard and proceed with KSM software installation.

How do I enable SSD in Windows 10?

A quick guide on how to initialize SSD Windows 10 with Disk Management: Move your mouse to the lower-left corner of your desktop and right-click on the Start icon, then select “Disk Management”. When Disk Management opens, a pop-up will appear and prompt you to initialize SSD.

How do I activate my SSD in Windows 10?

More videos on YouTube

  1. In Windows 10/8, press the “Windows + R” key, type “diskmgmt. msc” and click OK to launch Disk Management.
  2. Find and right-click the hard drive or SSD you want to initialize, and then click “Initialize Disk”.
  3. In the Initialize Disk dialog box, select the correct disk to initialize.

How do I activate my Kingston SSD?

Installation process

  1. Click on the Kingston SSD Manager (KSM) link to initialise the software download.
  2. Locate your download and extract the contents.
  3. Run the KSM Setup executable as administrator.
  4. Follow the prompts within the Setup Wizard and proceed with KSM software installation.

How do I fix hard drive not detected?

Here are a few troubleshooting steps you can take to remedy the situation.

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book.
  2. Try Another USB Port (or Another PC)
  3. Update Your Drivers.
  4. Enable and Format the Drive in Disk Management.
  5. Clean the Disk and Start From Scratch.
  6. Remove and Test the Bare Drive.

Why Kingston SSD toolbox not detecting SSD?

Although Kingston SSD Toolbox can monitor Kingston solid state disks efficiently, some users said that the Kingston SSD Toolbox cannot find drive when they ran this Toolbox. Solution to Kingston SSD Toolbox not detecting SSD Some professionals point out that users need to revert back to the Microsoft default AHCI driver and then run the Toolbox.

Is the Kingston SSD in the BIOS?

Kingston SSD isn’t detected in the BIOS ‎11-16-201803:12 PM HP Recommended Mark as New Bookmark Subscribe Permalink Print Email to a Friend Flag Post Product: HP ProBook 640 G1 Operating System: Microsoft Windows 10 (64-bit)

What happens to my SSD when it is returned to kingkingston?

Kingston takes measures to ensure the security of all of our customers’ personal information when a Solid State Drive (SSD) is returned to our RMA facility for warranty replacement or repair. When an SSD reaches our repair centre, it will undergo a thorough testing process.

How to backup Kingston SSD to external hard drive?

Step 1. Open this software. Select Backup from the left side. Then choose Disk Backup. Step 2. The Task Name can be modified by your needs. Select the Kingston SSD by clicking Add Disk.

Helpful tips